Set up with AutoStore

Administrative access to the server is required. All steps outlined are performed from the server where the installation takes place. In Start menu under Administrative Tools, go to Server Manager > Local Server > IE Enhanced Security Configuration and turn off Administrators.

Install DRS and create the application in DRS.
1. Select the Applications tab.
2. Click the green () button at the left, at the top of the Applications pane.
  
  The Add Application function loads into the right pane.
  
  Required fields are marked with red asterisks.
3. In the Name field (required), enter a name for the application. You can assign any name, such as Canon or other.
4. In the Server configuration list, select AutoStore.
5. When the DRS loads the default AutoStore server address into the AutoStore Server Address field, edit the IP address as required.
  
  For the IP address, you can enter IPv4 or IPv6 addresses depending on the configuration of your system. If you enter an IPv6 address, brackets ([ ]) are automatically added to it if missing when you exit from the field.
6. In the AutoStore Server TLS Port field, enter the server port used by the AutoStore server.
  
  The default value is 3310.
7. In the AutoStore Server Use TLS field, select True or False. This setting should reflect your AutoStore server configuration. Verify it in the Preference tab of Unified Client for Canon component. By default, the AutoStore setting "Use TLS" is OFF. If you leave it as OFF, select False in DRS.
8. In the Trust Self-signed Certificate for AutoStore field, select True to always trust self-signed certificates.
9. Click the Save button () at the top of the Add Application screen.
  
  The Application Profile added message appears.
Add the device in DRS.
1. Select the Devices tab.
2. Click the green () button on the left, at the top of the Devices pane.
  
  The Add Device function loads into the right pane.
3. In the Name field (required), enter a name for the Canon device or device group that identifies it on the network.
4. In the Address field (required), enter the IP address or the hostname of the device.
  
  For the IP address, you can enter IPv4 or IPv6 addresses depending on the configuration of your system. If you enter an IPV6 address, brackets ([ ]) are automatically added to it if missing when you exit from the field.
5. Username and Password are not in use. You may leave these boxes intact.
6. In the Application field, select the application you have created from the list.
7. In the Application Name field, enter text to customize the application name; otherwise leave the value empty and the default will be Kofax Unified Client.
8. In the Enable Debug Log entry, select True or False (default).
9. Click the Save () button at the top of the Add Device pane.
Configure installed Unified Client for Canon client application onto the device.
1. From the drop-down list at the top of the Details pane, select the Configure option. For details, see Unified Client for Canon actions reference.
  
  To go back to default values for assets; you must set and resync.
2. Click the Run Action button . You can follow deployment status feedback under Action History.
The Configure action may take a few moments to complete. Once finished, a Successfully completed message appears in the Action History pane at the bottom of the screen.

Restart the Canon MEAP after configuring the application.