Tungsten AutomationClient Help
  • Welcome to Tungsten ControlSuite Clients
  • ControlSuite Clients
    • Unified Clients overview
      • Brother Unified Client
        • Deployment steps
        • Requirements
        • Supported languages
        • Preparing for deployment
          • Verify that your device is supported
          • Verify prerequisites
          • Download installer package
        • Installing the Unified Client for Brother
          • Installing ControlSuite
          • Use DRS to configure and deploy the Unified Client
            • Manual Device Configuration
            • Generating CA Certificate using IP Address
            • Uninstalling Client using DRS
          • Setting up a Brother device
            • Ensure that BSI is enabled on the device
            • Ensure that application entry menus and CA certificate entry are available
            • Configure the Brother device in case Mass Deployment Tool is not in use
            • Install CA Certificate in case Mass Deployment Tool is not in use
            • Set up screen displayed on the Brother device after login
            • Recommendations for Brother device settings
        • Using the Unified Client for Brother
          • Features
          • Creating a capture workflow
            • Configure Send to Folder
          • Creating a print workflow
            • Use Print-to-Me
          • Configure Equitrac for use with the Unified Client for Brother
            • CAS offline operation through DCE caching
          • Typical user workflows
            • Log in to the Unified Client for Brother
              • Login with Equitrac and AutoStore
              • Login with Equitrac only
              • Login with AutoStore only
              • Register your card
              • Card readers
              • Card reader setup
              • Function Access Control
            • Enter Billing Codes
            • Print-to-Me
              • Release All
              • Release Key
            • Scan a document
              • Field Types
                • Checkbox field
                • Date field
                • Label field
                • List field
                • Lookup list field
                • Numeric field
                • Text field
                • Tree field
              • Scan Settings
            • Logout
        • Reference
          • Application properties
          • Device properties
          • Actions reference
        • Unified Client failover
        • Troubleshooting
          • Error messages
      • Canon Unified Client
        • System requirements
        • Third-party application dependencies
        • Supported languages
          • Switch language on the device
        • Deployment steps
          • Deploying with AutoStore
          • Deploying with Equitrac
          • Deploying with AutoStore and Equitrac
          • Deploying with Output Manager
          • Deploying with AutoStore and Output Manager
        • Preparing for deployment
          • Verify that your device is supported
          • Verify prerequisites
        • Installing the Unified Client for Canon
          • AutoStore server installation and configuration
          • Equitrac server installation and configuration
          • Output Manager server installation and configuration
          • Setting up a Canon device
            • Configure the device language and date/time settings
            • Enable SSL for remote UI
            • Install Canon application for AutoStore
            • Install Canon application for Equitrac or AutoStore and Equitrac
            • Install Canon application for Output Manager or AutoStore and Output Manager
            • Set the home screen for the guest user
            • Configure the TLS certificates
            • Recommendations for Canon device settings
            • Check the Canon platform version
          • Use DRS to configure and deploy the Unified Client
            • Set up with AutoStore
            • Set up with Equitrac
            • Set up with AutoStore and Equitrac
            • Set up with Output Manager
            • Set up with AutoStore and Output Manager
          • Install certificates in a ControlSuite NLB environment
        • Using the Unified Client for Canon
          • Set up your first AutoStore capture workflow
            • Configure scan to folder
            • Scanning with the Unified Client for Canon
              • Basic scan overview
              • Scan settings
              • Scan form overview
                • Text field
                • Numeric input field
                • Simple List field
                • Extendable/Multiselect/Database lookup fields
                • Date field
                • Tree field
                • Button field
                • Checkbox field
                • Label field
              • Complex scan overview
              • Scan limitations and constraints
          • Set up your first print job in Equitrac
            • Configure Print-to-Me
            • Use Print-to-Me
          • Set up your first print job in Output Manager
            • Configure Output Manager
            • Add a device
            • Set print preferences
          • Canon Unified Client Launcher screen
          • Main Menu button
        • Reference
          • Application properties
          • Device properties
          • Actions reference
          • Files Tab
          • Return codes
        • Appendix: Additional configuration instructions
          • Security
            • Configuring AA Common Access Card authentication solution
            • Changing the TLS settings
            • CAC Authentication and Equitrac MEAP Authentication solution
            • Set the Canon Auto Reset Timer
          • Canon licensing
          • Move the logo to the first screen
          • Renaming Embedded Application on Home Screen
          • Select user display style
          • Add a new Device profile
          • Import device information
          • Authentication and identification
          • Hardkey behavior
          • Server reconfiguration behavior
          • System timeout
          • Offline behavior
        • Appendix: Additional AutoStore instructions
          • Configuring authentication
          • LDAP Lookup Settings dialog box
          • Integration with MFP authentication
          • Adding and editing groups
          • Basic form
          • Scanning settings
          • Email form
          • Folder form
          • SharePoint form
          • Authentication tab
          • Authentication Prompts dialog box
          • Authenticate with Custom Scripting
          • Scripting overview
          • Unified Client component RRTs
          • Unified Client communication ports
        • Troubleshooting
          • Numeric field issue (on the server side)
          • User is removed from the current workflow
          • Device administrator cannot log in and cannot reach Settings > Registration
          • Documents sent from Business Connect cannot be printed
          • Canon device DRS configuration fails
          • Default Canon device administrator password fails
          • Business Connect authentication is not working when "Require PIN with card swipe" is enabled in OM settings
      • Epson Unified Client
        • Deployment steps
        • Prepare for deployment
          • Verify that your device is supported
          • Verify prerequisites
          • Download installer packages
          • Set up a scan watch folder
        • Installing the Unified Client for Epson
          • Install Equitrac
            • Install the Equitrac server
            • Enable Page Counters
          • Installing ControlSuite
          • Use DRS to configure and deploy the unified client
          • Device Web Server
            • Deployment scenarios
            • Managing the Device Web Server
              • Install the DWS with eCopy ShareScan
              • Install DWS after moving to an eCopy ShareScan only environment
              • Move to an eCopy ShareScan and Equitrac environment
        • Setting up the Epson MFP
          • Configure the Epson MFP
          • Update card reader settings to support Business Connect
        • Configuring the Unified Client for Epson
          • Setting up your first print workflow
            • Configure Print-to-Me
              • I-Queue printing
            • Use Print-to-Me
        • Reference
          • Application properties
            • Move from one DWS to another
          • Devices properties
          • Actions reference
            • Return codes
        • Appendix
          • Additional documentation
          • Troubleshooting
      • Fujifilm Unified Client
        • Requirements
        • Preparing for deployment
          • High availability support
          • Equitrac configuration
            • Configure authentication prompts
            • Configure Print-to-Me
            • Cached credentials for Equitrac
            • Campus card support
          • Output Manager configuration
            • Set print preferences
          • AutoStore configuration
            • Scanning settings in AutoStore
          • Device configuration
            • NVM setting
            • Set the IP mode
            • Turn on authentication setting
            • Device timeouts
            • FIPS 140-2 compatibility
            • Embedded Web Browser
          • DWS configuration
            • Dual stack limitations
            • Certificate management
              • DWS certificate management
              • Server certificate management
              • Device certificate management
          • Authentication configuration
            • Configure CAC for authentication
          • Card reader configuration
            • Configuring card reader authentication
            • Configuring card self-registration
        • Deploying the Unified Client for Fujifilm
          • Deployment overview
          • Use DRS to deploy and configure the unified client
          • Unregister the Unified Client for Fujifilm from the device
          • Create an AutoStore workflow
        • Using the Unified Client for Fujifilm
          • Getting started
            • Log in to the Unified Client for Fujifilm
              • Log in as an administrator
              • Microsoft Entra ID authentication with card registration
              • Card self-registration
            • Launcher screen
            • Screen elements
            • Device Home button
            • Release All
            • Release Key
            • Billing codes
              • Enter a billing code
            • Change the language on the device
            • Log out
          • Printing
            • Use Print-to-Me
            • Print Job Details screen
            • Print Settings screen
            • Print with Business Connect
            • Reconcile print transactions
          • Scanning
            • Scan a document
              • Scan metadata
            • Add email address to native emails
          • Job tracking
            • Data collected in tracking
        • Reference
          • Actions
          • Application properties
          • Device properties
        • Troubleshooting the Unified Client for Fujifilm
          • Download device logs
          • Download DWS debug logs
          • Error messages
      • HP Unified Client
        • Features
          • Authorization
        • Deployment steps
        • Requirements
        • Preparing for deployment
          • Verify prerequisites
          • Equitrac configuration
            • Configure authentication prompts
          • Output Manager configuration
            • Set print preferences
          • AutoStore configuration
            • Scanning settings
          • Authentication configuration
            • Configure CAC for authentication
          • Workflow configuration
            • Custom workflows
          • Card reader configuration
            • Configuring card self-registration
          • DWS configuration
            • Dual stack limitations
        • Deploying the Unified Client for HP
          • Installing ControlSuite
            • Update DWS certificates
          • Use DRS to configure and deploy the unified client
          • Setting up the HP device
            • Ensure that previous Tungsten Automation applications are cleared
          • Creating a print workflow
            • Configure Print-to-Me
          • Creating a capture workflow
            • Configure the Send to Folder workflow
        • Using the Unified Client for HP
          • Getting started
            • Log in to the Unified Client for HP
              • Microsoft Entra ID authentication with card registration
              • Card self-registration
            • Launcher screen
            • Release All
            • Release Key
            • Billing codes
              • Enter billing codes
            • Log out
          • Printing
            • Print-to-Me
              • Use Print-to-Me
            • Print Jobs Details
            • Print Settings
            • Print with Business Connect
            • Reconcile print transactions
          • Scanning
            • Scan a document
              • Scan settings
          • Job tracking
            • Data collected in tracking
        • Reference
          • Unified Client for HP actions reference
          • Unified Client for HP application properties
          • Unified Client for HP device properties
        • Unified Client failover
        • Troubleshooting
          • Error messages
      • Konica Minolta Unified Client
        • Product features
        • Campus card support
        • Delegate printing support
        • Runtime Replacement Tag (RRT) support
        • Failover support
        • System requirements
          • Supported devices
        • Prepare for deployment of Unified Client for Konica Minolta
          • Equitrac configuration
            • Configuring authentication prompts
          • Output Manager configuration
            • Set print preferences
            • Configure device for access control
          • AutoStore configuration
            • Scanning settings in AutoStore
            • Dynamic form support
            • Migrate workflows
          • Workflow configuration
            • Walk-up copy workflows and billing codes
          • Authentication configuration
            • Credential caching
          • DWS configuration
            • DWS configuration for TLS
            • Certificate management
              • DWS certificate management
              • Server certificate management
              • Device certificate management
              • Certificate acceptance
            • Dual stack limitations
          • Device configuration
            • SSL
              • Enable and configure SSL
            • TCP socket setting
            • Page size release
            • Web browser
            • WebDAV client
            • Auto reset
            • Printing support
            • Hide slide menu tab
            • Update HTTP setting
          • Card reader configuration
            • Considerations for setting up a card reader
            • Configuring card reader authentication
            • Configuring card self-registration
        • Deploy Unified Client for Konica Minolta
          • Overview of the deployment process
          • DRS setup and device registration
          • Change configuration
          • Unregister Unified Client for Konica Minolta from the device
          • Create a first workflow in AutoStore
        • Using Unified Client for Konica Minolta
          • Getting started with the Unified Client for Konica Minolta
            • Logging on
              • Microsoft Entra ID authentication with card registration
              • Card self-registration
              • Public access
            • Billing codes
              • Show recently used billing codes
            • Launcher screen
            • Release key
            • Device Home button
            • Screen elements
            • Logging off
          • Printing features
            • Print job management
              • Print-to-Me screen
              • Print Jobs Details screen
              • Print Settings screen
            • Printing with Tungsten Business Connect
          • Scanning features
            • Scan documents
              • Scan form fields
          • Job tracking
            • Data collected in tracking
          • GDPR compliance tasks
        • Reference
          • Unified Client for Konica Minolta application properties
          • Unified Client for Konica Minolta device properties
          • Unified Client for Konica Minolta actions reference
        • Debugging tips
          • DWS debug logs
          • Device debug logs
        • Troubleshooting the Unified Client for Konica Minolta
          • Error messages
      • Lexmark Unified Client
        • Features
        • System requirements
        • Prepare to deploy the Unified Client for Lexmark
          • Device configuration
            • Enable HTTPS
            • Create a local device administrator
          • Equitrac configuration
            • Configure authentication prompts
            • Configure the Quick Shortcut buttons
            • DCE pinning
          • Output Manager configuration
            • Add a device
            • Set print preferences
          • AutoStore configuration
            • Scanning settings
          • Workflow configuration
            • Walk-up copy workflows and billing codes
          • Authentication configuration
            • Configure CAC for authentication
          • Card reader configuration
            • Configuring card self-registration
        • Deploy the Unified Client for Lexmark
          • Use DRS to configure and deploy the unified client
        • Using the Unified Client for Lexmark
          • Getting started
            • Log onto the Unified Client for Lexmark
              • Card self-registration
            • Change the language on the device
            • Launcher screen
            • Home button
            • Screen elements
            • Release All
            • Release Key
            • Billing codes
            • Log out
          • Printing
            • Print-to-Me
            • Print Jobs Details
            • Print Settings
            • Print with Business Connect
          • Scanning
            • Create an AutoStore workflow
            • Scan settings
            • Scan a document
          • Job tracking
            • Data collected in tracking
        • Reference
          • Unified Client for Lexmark actions reference
          • Unified Client for Lexmark application properties
          • Unified Client for Lexmark device properties
        • Debugging tips
          • Download debugging logs
        • Troubleshooting
          • Error messages
      • Ricoh Unified Clients
        • Ricoh SOP for AutoStore
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy the Unified Client for Ricoh SOP
            • Install ControlSuite for AutoStore
            • Configuring a Ricoh device in a unified client environment
            • Install and configure the TLS certificates
            • Ensure that previous applications are cleared
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
              • DRS authorization
          • Using the Unified Client for Ricoh SOP
            • Elements of the Ricoh SOP user interface
            • Launcher screen
            • Set up your first AutoStore Capture workflow
              • Configure Scan to Folder
              • Scanning settings
          • Reference
            • Unified Client for Ricoh actions reference
              • Return codes
              • Action status codes
            • Unified Client for Ricoh application properties
            • Unified Client for Ricoh device properties
              • Device status
            • Files tab
              • Application types
            • Add a device profile
            • Import device information
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Device configuration for AuthOff
            • Configuring the CAC authentication solution
            • Configure SP Mode Settings
            • Change the TLS settings
            • DRS Authorization Key
            • Restart the device
        • Ricoh SOP for AutoStore and Equitrac
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy the Unified Client for Ricoh SOP
            • Install ControlSuite for AutoStore and Equitrac
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
                • DRS settings after uninstalling the unified client
              • DRS authorization
            • Set up a Ricoh MFP device
              • Configuring a Ricoh device in a unified client environment
              • Install and configure the TLS certificates
              • Ensure that previous applications are cleared
            • Configuring Equitrac to use with Ricoh SOP
              • Configure Equitrac
                • Installation and configuration
                • Equitrac card readers
                • Card reader setup
          • Using the Unified Client for Ricoh SOP
            • Elements of the Ricoh SOP user interface
            • Launcher screen
            • Getting started
              • Logging into Unified Client for Ricoh Smart Operation Panel
                • Microsoft Entra ID authentication with card registration
                • If you have difficulty logging in
              • Enter billing codes
              • Print-to-Me
              • Scanning
                • Terminology
                • Prepare to scan
                • Delivery formats
              • Search using LDAP Email
              • Logout
            • Set up your first AutoStore Capture workflow
              • Configure Scan to Folder
              • Scanning settings
            • Set up your first print workflow
              • Use Print-to-Me
          • Reference
            • Unified Client for Ricoh actions reference
              • Return codes
              • Action status codes
            • Unified Client for Ricoh application properties
            • Unified Client for Ricoh device properties
              • Device status
            • Files tab
              • Application types
            • Add a new Device profile
            • Import device information
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Job tracking
            • Enable home key settings
            • Enable the billing code prompt
            • Disable print from USB
            • Configuring the CAC authentication solution
            • Configure SP mode settings
            • Change the TLS settings
            • Set the paper type
            • System configuration settings
            • DCE pinning
            • DRS Authorization Key
            • Restart the device
        • Ricoh SOP for AutoStore and Output Manager
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy the Unified Client for Ricoh SOP
            • Install ControlSuite for AutoStore and Output Manager
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
                • DRS settings after uninstalling the unified client
              • DRS authorization
            • Set up a Ricoh MFP device
              • Configuring a Ricoh device in a unified client environment
              • Install and configure the TLS certificates
              • Ensure that previous applications are cleared
          • Using the Unified Client for Ricoh SOP
            • Elements of the Ricoh SOP user interface
            • Launcher screen
            • Getting started
              • Typical usage
                • Output Manager login
                  • Login settings
                  • User name and password entry
                  • Card swipe
                  • Manual ID entry
                  • Microsoft Entra ID authentication with card registration
                • Screen layout
                • View print jobs
                • Logout
            • Set up your first AutoStore Capture workflow
              • Configure Scan to Folder
              • Scanning settings
            • Set up your first print workflow
              • Add sources
              • Add destinations
              • Manually route documents to a destination
          • Reference
            • Unified Client for Ricoh actions reference
              • Return codes
              • Action status codes
            • Unified Client for Ricoh application properties
            • Unified Client for Ricoh device properties
              • Device status
            • Files tab
              • Application types
            • Add a new device profile
            • Import device information
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Job tracking
            • Enable home key settings
            • Disable print from USB
            • Configuring the CAC authentication solution
            • Configure SP Mode Settings
            • Change the TLS settings
            • Set the paper type
            • DRS Authorization Key
            • Restart the device
        • Ricoh SOP for Output Manager
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy the Unified Client for Ricoh SOP
            • Install ControlSuite for Output Manager
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
                • DRS settings after uninstalling the unified client
              • DRS authorization
            • Set up a Ricoh MFP device
              • Configuring a Ricoh device in a unified client environment
              • Install and configure the TLS certificates
              • Ensure that previous applications are cleared
          • Using the Unified Client for Ricoh SOP
            • Elements of the Ricoh SOP user interface
            • Launcher screen
            • Getting started
              • Typical usage
                • Output Manager login
                  • Login settings
                  • User name and password entry
                  • Card swipe
                  • Manual ID entry
                  • Microsoft Entra ID authentication with card registration
                • Screen layout
                • View print jobs
                • Logout
            • Set up your first print workflow
              • Add sources
              • Add destinations
              • Manually route documents to a destination
          • Reference
            • Unified Client for Ricoh actions reference
              • Return codes
              • Action status codes
            • Unified Client for Ricoh application properties
            • Unified Client for Ricoh device properties
              • Device status
            • Files tab
              • Application types
            • Add a new Device profile
            • Import device information
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Job tracking
            • Enable home key settings
            • Disable print from USB
            • Configuring the CAC authentication solution
            • Configure SP Mode Settings
            • Change the TLS settings
            • Set the paper type
            • DRS Authorization Key
            • Restart the device
        • Ricoh PCC for Equitrac
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy Ricoh PCC
            • Install ControlSuite for Equitrac
            • Set up the Equitrac Embedded for Ricoh PCC SFP or MFP
              • Configuring a Ricoh device in a unified client environment
              • Install and configure the TLS certificates
              • Ensure that previous applications are cleared
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
              • DRS authorization
            • Configuring Equitrac to use with Ricoh PCC
              • Configure Equitrac
                • Installation and configuration
                  • Server-side configuration scenario
                  • Equitrac card readers
                  • Card reader setup
          • Using Ricoh PCC
            • Elements of the Ricoh PCC user interface
            • Launcher screen
            • Getting started
              • Logging in
                • Microsoft Entra ID authentication with card registration
                • If you have difficulty logging in
              • Enter billing codes
              • Print-to-Me
              • Scanning
                • Terminology
                • Prepare to scan
                • Delivery formats
              • Search using LDAP Email
              • Logout
            • Set up your first print workflow
              • Use Print-to-Me
          • Reference
            • Actions reference
              • Error codes
              • Return codes
              • Action status codes
            • Application properties
            • Device properties
              • Device status
            • Files tab
              • Application types
            • Add a new Device profile
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Job tracking
            • Enable home key settings
            • Enable the billing code prompt
            • Disable print from USB
            • Configuring the CAC authentication solution
            • Configure SP Mode settings
            • Change the TLS settings
            • Set the paper type
            • System configuration settings
            • DCE pinning
            • DRS Authorization Key
            • Restart the device
        • Ricoh PCC for AutoStore and Equitrac
          • Deployment steps
          • Prepare for deployment
            • Requirements
            • Verify prerequisites
            • Download installer packages
          • Deploy Ricoh PCC
            • Install ControlSuite for Equitrac and AutoStore
            • Use DRS to configure and deploy the unified client
              • Uninstall the client using DRS
              • DRS authorization
            • Set up a Ricoh PCC MFP
              • Configuring a Ricoh device in a unified client environment
              • Install and configure the TLS certificates
              • Ensure that previous applications are cleared
            • Configuring Equitrac to use with Ricoh PCC
              • Configure Equitrac
                • Installation and configuration
                  • Server-side configuration scenario
                  • Equitrac card readers
                  • Card reader setup
          • Using Ricoh PCC
            • Elements of the Ricoh PCC user interface
            • Launcher screen
            • Getting started
              • Logging in
                • Microsoft Entra ID authentication with card registration
                • If you have difficulty logging in
              • Enter billing codes
              • Print-to-Me
              • Scanning
                • Terminology
                • Prepare to scan
                • Delivery formats
              • Search using LDAP Email
              • Logout
            • Set up your first AutoStore Capture workflow
              • Configure Scan to Folder
              • Scanning settings
            • Set up your first print workflow
              • Use Print-to-Me
          • Reference
            • Actions reference
              • Return codes
              • Action status codes
            • Application properties
            • Device properties
              • Device status
            • Files tab
              • Application types
            • Add a new device profile
          • Appendix: Additional configuration instructions
            • Troubleshooting
            • Download logs
            • Job tracking
            • Enable home key settings
            • Enable the billing code prompt
            • Disable print from USB
            • Configuring the CAC authentication solution
            • Configure SP Mode settings
            • Change the TLS settings
            • Set the paper type
            • System configuration settings
            • DCE pinning
            • DRS Authorization Key
            • Restart the device
      • Samsung Smart UX Unified Client
        • Checklist: Unified Client for Samsung Smart UX implementation
        • Requirements
          • Multi-language support
        • Configuring Unified Client for Samsung Smart UX
          • AutoStore configuration
            • AutoStore features
            • AutoStore server-side configuration
            • Additional documentation for AutoStore
            • AutoStore Smart UX component licensing
          • Equitrac configuration
            • Equitrac features
            • Installation and configuration
              • Before you install
              • Equitrac server-side configuration
              • Additional documentation for Equitrac
              • Equitrac card readers
              • Card reader setup
              • USB keyboards
          • Use DRS to configure and deploy the unified client
            • Set up with AutoStore
            • Set up with Equitrac
            • Set up with AutoStore and Equitrac
          • Server-side configuration
            • Licensing Unified Client for Samsung Smart UX
              • If the license is invalid
              • If the serial number is denied
            • Add a printer on a TCP/IP printer port
            • Configuring Unified Client for Samsung Smart UX embedded devices
            • Automatically creating embedded devices
            • Manually configuring embedded devices
            • Licensing the device
            • Enabling the Guest user
              • Guest user setup
            • Configuring workflows
            • Tracking jobs originating at the device
            • Setting timeouts
            • Enabling secure printing
              • Secure printing on the physical device
              • Enable secure printing on the embedded device
            • Configure Print-to-Me
            • Configure Capture and Send
              • Scan-to-Me
              • Configure the Mail Server
              • Enforce color quotas
              • Enable the billing code prompt
            • Operation through DCE caching
            • Configure account and session display
            • Configuring available MFP functions
            • Samsung Smart UX workflow and workflow container settings for the device
        • Using Unified Client for Samsung Smart UX
          • Elements of Unified Client for Samsung Smart UX user interface
          • Getting started
            • Logging into Unified Client for Samsung Smart UX
              • If you have difficulty logging in
            • Enter billing codes
            • Using Print-to-Me
            • Scanning
              • Terminology
            • Prepare to scan
            • Using LDAP Email Search
        • Reference
          • Application properties
          • Device properties
            • Device status
          • Files tab
          • Actions reference
          • Return codes
          • Action status codes
      • Toshiba Unified Client
        • Features
        • Deployment steps
        • Preparing for deployment
          • Verify prerequisites
            • Language support
          • Download installer packages
          • Device Web Server
            • Deployment scenarios
            • Managing the Device Web Server
              • Install the DWS with AutoStore
              • Install the DWS after moving to an AutoStore only environment
              • Move to an AutoStore and Equitrac environment
          • Equitrac configuration
            • Set up the Tungsten button on Equitrac
            • Configure the Launcher
            • Enabling the Guest user
              • Set up the Guest user
            • Configure workflows
            • Track jobs originating at the device
            • Configure card self-registration
            • Secure printing
              • Configure the print queue
          • AutoStore configuration
            • Set up the Tungsten button on AutoStore
            • Scan settings
        • Deploying the Unified Client for Toshiba
          • Installing the Unified Client for Toshiba
            • Installing ControlSuite
            • Install the AutoStore server
              • License AutoStore
            • Installing Equitrac
              • Install the Equitrac server
              • Install the Equitrac hotfixes
            • Install DWS standalone
          • Install DRS and upload the client package
          • Set up the Toshiba MFP
            • Configure the Toshiba MFP in a Unified Client environment
            • Install SSL/TLS root certificate
            • Import or create the Device Certificate on the Toshiba device
            • Ensure SSL/TLS is enabled for ODCA on the Toshiba device
            • Clear previous applications
          • Set up your first capture workflow
            • Configure Send to Folder
          • Set up your first print workflow
            • Configure Print-to-Me
              • I-Queue printing
              • Enable release keys
        • Using the Unified Client for Toshiba
          • Getting started
            • Logging into Unified Client for Toshiba
            • Elements of the user interface
            • Launcher
            • Release All
            • Release key
            • Enter billing codes
            • Use Print-to-Me
            • Scanning
              • Prepare to scan
            • Using Native Copy, Fax, and Scan
            • Logging out
        • Reference
          • Device properties
          • Actions reference
          • Application properties
          • Return codes
          • Device notes
            • Changing the EXTENSION button label
            • Finalizing the uninstallation
            • Reboot the device
        • Troubleshooting
      • Xerox Unified Client
        • System requirements
        • Prepare for deployment of Unified Client for Xerox
          • Equitrac configuration
            • Configuring authentication prompts
          • Output Manager configuration
            • Set print preferences
          • AutoStore configuration
            • Scanning settings in AutoStore
              • Scan settings constraints
            • Dynamic form support
            • Migrate workflows
          • Workflow configuration
            • Centralized and decentralized workflows
            • Walk-up copy workflows and billing codes
          • Authentication configuration
            • Xerox component RRTs
            • Credential caching
          • Timeout configuration
          • DWS configuration
            • Failover support
            • DWS configuration for TLS
            • Certificate management
              • DWS certificate management
              • Server certificate management
              • Device certificate management
            • Export the root self-signed certificate from DWS
          • Device configuration
            • AltaLink configuration
            • PrimeLink configuration
            • VersaLink properties
            • Dual stack limitations
          • Card reader configuration
            • Card reader licensing
            • Adding card reader support
            • Adding Smart Card Support
            • Configuring card reader authentication
            • Configuring card self-registration
        • Deploy Unified Client for Xerox
          • Overview of the deployment process
          • DRS setup and device registration
          • Unregister Unified Client for Xerox from the device
          • Set language of client
          • Create a first workflow
        • Using Unified Client for Xerox
          • Getting started with the Unified Client for Xerox
            • Logging on
              • Card self-registration
              • Microsoft Entra ID authentication with card registration
            • Billing codes
            • Launcher screen
            • Release key
            • Device Home button
            • Screen elements
            • Logging off
          • Printing features
            • Print job management
              • Print-to-Me screen
              • Print Jobs Details screen
              • Print Settings screen
            • Printing with Tungsten Business Connect
            • Reconcile print transactions
          • Scanning features
            • Scan documents
              • Scan form fields
            • Scan Settings screen
          • Job tracking
            • Data collected in tracking
          • GDPR compliance tasks
        • Reference
          • Unified Client for Xerox application properties
          • Unified Client for Xerox device properties
          • Unified Client for Xerox Actions reference
        • Debugging tips
          • DWS debug logs
          • Device debug logs
        • Troubleshooting the Unified Client for Xerox
          • Error messages
    • Combined Clients overview
      • Konica Minolta Combined Client
        • Implementation checklist
        • Requirements
        • Prepare the MFP to run the Combined Client for Konica Minolta
          • Configure Konica Minolta OpenAPI
          • Configure MFP Auto Reset Settings
          • Configure MFP for print release
          • Configuring a device to use the authentication application
            • Configure a device to use SSL for Web Services (OpenAPI)
            • Configure WebDAV to use SSL
            • Configure TCP Socket Setting to use SSL/TLS
            • Enable Web Browser
            • Check Authentication
          • Certificate validation
        • Configuring the Combined Client for Konica Minolta
          • Configure Equitrac
            • Server side configuration
            • Configure secure printing
            • Configure an embedded device
            • Configure authentication prompts
            • Configure printer driver
              • Configure device print tracking
              • Configure user authentication
              • Configure print authentication at the MFP
            • Configure billing codes for Combined Client for Konica Minolta devices
              • Configure a default billing code
            • Enforce color quotas
            • Receiving print error messages
            • Equitrac only deployment configuration
            • Copy Stop
          • Configure Output Manager
            • Output Manager authentication
              • Card reader authentication with Output Manager
              • Output Manager touchscreen authentication
            • Configure the client web server
            • Configure Output Manager devices
              • Configure device for accounting
              • Configure device for access control
              • Configure device for print preferences
              • Configure login methods
              • Configure billing accounts
              • Configure copy quotas
              • Configure an Output Manager destination
            • Accounting
            • Output Manager only deployment
          • Configure AutoStore
            • AutoStore authentication
            • AutoStore only deployment
        • Using the Combined Client for Konica Minolta
          • Combined Client for Konica Minolta login
            • Output Manager login
            • AutoStore login
            • Equitrac login
          • Switch between capture and print
          • Manage print jobs
          • Configure print settings
          • View Print Manager job information
          • Start an AutoStore workflow
        • Reference
          • Application settings
          • Device settings
          • Actions reference
          • Return codes
        • Restrictions and limitations
        • Troubleshooting
    • AutoStore Clients overview
      • Kyocera MFP (HyPAS)
        • Overview
        • Using the Kyocera MFP (HyPAS) component
        • Kyocera MFP (HyPAS) Component configuration
          • Groups tab
            • Groups
            • Menus
            • Forms
              • Basic form
                • PDF Encryption Settings dialog box
              • Send to Folder form
              • Email form
              • Send to SharePoint form
              • Form templates
              • Field types
                • Checkbox field options
                • Date/time field options
                • List field options
                • Numeric field options
                • Text field options
                • Tree field options
          • Preferences tab
          • Authentication tab
            • LDAP Lookup Settings dialog box
          • Kyocera MFP (HyPAS) component RRTs
          • Setting the component log level
        • Device setup and configuration
          • Install the KYOcapture MFP application
          • License the KYOcapture application
          • Configure the KYOcapture application for the first time
          • Change a configuration
          • Scan a document from a device
        • Supported devices
    • Equitrac Clients overview
      • Kyocera Embedded Client
        • About user authentication
        • About Secure Document Release
        • Supported MFPs and card readers
          • Magstripe device reader
          • Proximity cards
        • System requirements
        • Installation and configuration requirements
        • List of terms
        • Server and MFP configuration
          • Install the embedded application
          • Create and configure embedded devices
            • Automatically create embedded devices
            • Manually configure embedded devices
          • Configure authentication prompts
          • Configure billing code popup behavior
          • Enable release key prompt
          • Configure Follow-You Printing
          • Copy enforcement and configuration
            • Color quota enforcement
          • Configure the MFP through a web interface
          • Add Kyocera controller
        • User workflows
          • Authenticate with a magnetic stripe card
          • Authenticating with a proximity or smart card
          • Card reader status messages
          • Register swipe cards
          • Billing codes and job release
          • Use Follow-You Printing with Kyocera devices
      • Sharp-OSA Embedded Client
        • Requirements
        • Supported MFPs and Card Readers
        • List of Terms
        • MFP and Server Configuration
          • Configuring the Application on the Server
          • Creating and Configuring Embedded Devices
          • Automatically Create Embedded Devices
          • Manually Configure Embedded Devices
          • Configuring a Specific Device
            • Billing code behavior
          • Configuring Print Tracking
            • Print Tracking Through Equitrac Ports
            • Print Tracking Through the MFP Accounting Log
          • Configuring Follow-You Printing
          • Enabling Release Keys
          • Configuring Authentication Prompts
          • Preparing to Configure Sharp MFPs
          • Preparing to Configure the Embedded Application via a Web Interface
          • Configure the Application on Sharp OSA3.5 and OSA4 MFPs
            • Enable authentication
            • Configure the Follow-You Printing Application
          • Set up a card reader
        • User Workflows
          • Using Sharp OSA3.5 and OSA4 MFPs
          • Using Follow-You Printing on OSA3.5 and OSA4 MFPs
      • Xerox ECSP Embedded Client
        • About user authentication
        • Xerox ECSP features
        • Installation and configuration requirements
          • Server and MFP requirements
        • System requirements
        • Supported MFPs
          • Magstripe device reader
          • Proximity Cards
        • List of terms
        • MFP configuration
          • Configure MFP properties
          • Configure the AltaLink series
          • Configure the PrimeLink series
          • Configure the VersaLink series
          • Configure the WorkCentre 4265
          • WorkCentre 57xx series
            • Locate Custom Services
            • Configure on the MFP console
            • Configure from the Internet Services Interface
          • WorkCentre 75xx series
            • Locate Custom Services
            • Configure on the MFP console
            • Configure from the Internet Services Interface
            • Set the default landing page
          • ConnectKey enabled MFPs
            • Locate Custom Services
            • Configure on the MFP console
            • Configure from the Internet Services Interface
            • Set the default landing page
        • ColorQube 92xx series
          • Locate Custom Services
          • Configure on the MFP console
          • Configure from the Internet Services Interface
        • Server-side configuration
          • Configure secure printing
          • Configure authentication prompts
            • Set Xerox Convenience Authentication prompts
            • Enable release keys
          • Configure billing code popup behavior
          • Configure embedded devices
          • Configure workflows
          • Print tracking configuration
            • Track print through printer ports
            • Track print using Xerox Network Accounting
            • Disable Equitrac print tracking
            • Track color prints or copies using Xerox tiered billing
            • Enable escrow for print and copy
            • Receive print error messages
            • Reconcile print transactions
          • Add Workflows to the Xerox All Services screen
          • Configure SNMP Communication
          • Add a customized logo
        • User workflows
          • Authenticate with a magnetic stripe card
          • Authenticate with a proximity card
          • Card reader status messages
          • Logging in to a user session
            • Authenticate through the Equitrac Server
          • Selecting functions
          • Using Follow-You Printing
          • Scanning
            • Terminology
            • Scan workflow overview
            • Scan workflows
            • Use LDAP Email Search
            • Adjusting the Scan Settings
            • Delivery formats
          • Scan image orientation
  • Device Registration Service
    • Open the DRS web client
    • Working with Applications
      • Add an Application profile
      • Edit Application profile settings
    • Working with Devices
      • Add a new Device profile
      • Edit a Device
      • Changing languages on Device
        • Change language on eBN Device
        • Change language on eBX Device
      • Filter Device and group information
      • Import Device information
      • Export Device information
      • Device status
    • Working with Device Groups
      • Add a Device group
      • Add an existing Device to a Device group
      • Add a new Device profile to a Device group
      • Move devices to a different group
    • Working with client packages
      • Files list (Unified Client installation packages)
      • Upload a Unified or Combined Client installation package to DRS
      • Remove a package file from DRS
      • Rename a package file in DRS
    • Performing Actions on Devices
      • Perform Device Actions
      • View Action history
      • Download DRS logs
    • Use multiple DRS instances with one database
    • Manage the DRS service on the server
    • Troubleshooting the DRS
      • Service verification
  • Device Web Server
    • View the DWS Web administration page
    • Purge DWS logs
    • Generate a CA Certificate using an IP address
    • Regenerate certificates
    • DWS failover
      • DWS failover scenarios
 › ControlSuite Clients › Unified Clients overview › Tungsten Unified Client for Toshiba › Preparing for deployment › Device Web Server › Managing the Device Web Server

Managing the Device Web Server

  • Install DWS with AutoStore
  • Install the DWS after moving to an AutoStore only environment
  • Move to an AutoStore and Equitrac environment

Tungsten ControlSuite 2025.2
×