Unified Client for Xerox EIP Connect application properties

Unified Client for Xerox EIP Connect device or device group parameters in the Device Registration Service device profile. These are configured in the Device Registration Service web console.

The items entered below are applied by clicking the Save application button or canceled by clicking the Cancel button.

The following options are configurable for a Unified Client for Xerox EIP Connect application.

Option	Description
Name	The name of the application.
Application Type	The application type is based on the type of device. For Xerox, select Xerox EIP.
AutoStore Server Address	The IP address, computer name, or DNS name of the machine where the AutoStore Server is installed. The default is the local IP address. Important: An entry must be made when using AutoStore or both AutoStore and Output Manager.
Print Manager	Specifies the print manager to be used with an application. The following option is current available for a Unified Client for Xerox EIP Connect Application: Output Manager
Print Manager Address	The IP address of the machine where the print manager is installed. The default is the local IP address. Important: An entry must be made when using either Equitrac or Output Manager or when using AutoStore with either Output Manager or Equitrac.
Print Manager URI	The URI for the Print Manager server. the default has the following format: `http://<LOCAL IP ADDRESS>:8068`. You can specify HTTP, Net.TCP, or HTTPS protocols. Output Manager settings should be configured to support the selected protocol. Important: An entry must be made when using Output Manager or both AutoStore and Output Manager.
Web Application Port	The port number used by the Web Application. The default is 3241. Note: The port number entered here must match the port number that was used when configuring AutoStore or Output Manager. You can use the port number for the following configuration: AutoStore only: The port number used when configuring the component with AutoStore Process Designer. AutoStore and Output Manager: The port number used when configuring the component with AutoStore Process Designer. Output Manager only: The port number used when configuring Server port on the Clients tab located in the Set General Preferences settings of the Administration module of Output Manager.
Use SSL for Web Application	Enables secure socket layer (SSL) for the Web Application. The default is True.
Application Timeout	The time after which Notable Solutions Unified Client will timeout. The default is 60 seconds.