Confirming the Installation

After performing a bulk install, log on to the web configuration page for each device to confirm that the embedded solution was installed successfully.
  1. Open a web browser, and enter the URL: http://<MFP_IP_address> in the address field.
  2. Login with your Administrator credentials.
  3. Click the General tab, and select Solution Installer from the left navigation pane.
  4. Ensure that the Equitrac Auth Page bundle checkbox is selected.
    Note: If the Equitrac Auth Page bundle checkbox is not selected, then the solution was not installed on the device. Check that the associated device is in the All Devices list in Web Jetadmin before trying to reinstall the solution. Add the device to the All Devices list and run the bulk install again, or refer to Single Device Install to install the solution directly on the device.
  5. Logout of the web configuration page.