Client Help
Welcome to Tungsten ControlSuite Clients
ControlSuite Clients
Unified Clients overview
Brother Unified Client
Deployment steps
Requirements
Supported languages
Preparing for deployment
Verify that your device is supported
Verify prerequisites
Download installer package
Installing the Unified Client for Brother
Installing ControlSuite
Use DRS to configure and deploy the Unified Client
Manual Device Configuration
Generating CA Certificate using IP Address
Uninstalling Client using DRS
Setting up a Brother device
Ensure that BSI is enabled on the device
Ensure that application entry menus and CA certificate entry are available
Configure the Brother device in case Mass Deployment Tool is not in use
Install CA Certificate in case Mass Deployment Tool is not in use
Set up screen displayed on the Brother device after login
Recommendations for Brother device settings
Using the Unified Client for Brother
Features
Creating a capture workflow
Configure Send to Folder
Creating a print workflow
Use Print-to-Me
Configure Equitrac for use with the Unified Client for Brother
CAS offline operation through DCE caching
Typical user workflows
Log in to the Unified Client for Brother
Login with Equitrac and AutoStore
Login with Equitrac only
Login with AutoStore only
Register your card
Card readers
Card reader setup
Function Access Control
Enter Billing Codes
Print-to-Me
Release All
Release Key
Scan a document
Field Types
Checkbox field
Date field
Label field
List field
Lookup list field
Numeric field
Text field
Tree field
Scan Settings
Logout
Reference
Application properties
Device properties
Actions reference
Unified Client failover
Troubleshooting
Error messages
Canon Unified Client
System requirements
Third-party application dependencies
Supported languages
Switch language on the device
Deployment steps
Deploying with AutoStore
Deploying with Equitrac
Deploying with AutoStore and Equitrac
Deploying with Output Manager
Deploying with AutoStore and Output Manager
Preparing for deployment
Verify that your device is supported
Verify prerequisites
Installing the Unified Client for Canon
AutoStore server installation and configuration
Equitrac server installation and configuration
Output Manager server installation and configuration
Setting up a Canon device
Configure the device language and date/time settings
Enable SSL for remote UI
Install Canon application for AutoStore
Install Canon application for Equitrac or AutoStore and Equitrac
Install Canon application for Output Manager or AutoStore and Output Manager
Set the home screen for the guest user
Configure the TLS certificates
Recommendations for Canon device settings
Check the Canon platform version
Use DRS to configure and deploy the Unified Client
Set up with AutoStore
Set up with Equitrac
Set up with AutoStore and Equitrac
Set up with Output Manager
Set up with AutoStore and Output Manager
Install certificates in a ControlSuite NLB environment
Using the Unified Client for Canon
Set up your first AutoStore capture workflow
Configure scan to folder
Scanning with the Unified Client for Canon
Basic scan overview
Scan settings
Scan form overview
Text field
Numeric input field
Simple List field
Extendable/Multiselect/Database lookup fields
Date field
Tree field
Button field
Checkbox field
Label field
Complex scan overview
Scan limitations and constraints
Set up your first print job in Equitrac
Configure Print-to-Me
Use Print-to-Me
Set up your first print job in Output Manager
Configure Output Manager
Add a device
Set print preferences
Canon Unified Client Launcher screen
Main Menu button
Reference
Application properties
Device properties
Actions reference
Files Tab
Return codes
Appendix: Additional configuration instructions
Security
Configuring AA Common Access Card authentication solution
Changing the TLS settings
CAC Authentication and Equitrac MEAP Authentication solution
Set the Canon Auto Reset Timer
Canon licensing
Move the logo to the first screen
Renaming Embedded Application on Home Screen
Select user display style
Add a new Device profile
Import device information
Authentication and identification
Hardkey behavior
Server reconfiguration behavior
System timeout
Offline behavior
Appendix: Additional AutoStore instructions
Configuring authentication
LDAP Lookup Settings dialog box
Integration with MFP authentication
Adding and editing groups
Basic form
Scanning settings
Email form
Folder form
SharePoint form
Authentication tab
Authentication Prompts dialog box
Authenticate with Custom Scripting
Scripting overview
Unified Client component RRTs
Unified Client communication ports
Troubleshooting
Numeric field issue (on the server side)
User is removed from the current workflow
Device administrator cannot log in and cannot reach Settings > Registration
Documents sent from Business Connect cannot be printed
Canon device DRS configuration fails
Default Canon device administrator password fails
Business Connect authentication is not working when "Require PIN with card swipe" is enabled in OM settings
Epson Unified Client
Deployment steps
Prepare for deployment
Verify that your device is supported
Verify prerequisites
Download installer packages
Set up a scan watch folder
Installing the Unified Client for Epson
Install Equitrac
Install the Equitrac server
Enable Page Counters
Installing ControlSuite
Use DRS to configure and deploy the unified client
Device Web Server
Deployment scenarios
Managing the Device Web Server
Install the DWS with eCopy ShareScan
Install DWS after moving to an eCopy ShareScan only environment
Move to an eCopy ShareScan and Equitrac environment
Setting up the Epson MFP
Configure the Epson MFP
Update card reader settings to support Business Connect
Configuring the Unified Client for Epson
Setting up your first print workflow
Configure Print-to-Me
I-Queue printing
Use Print-to-Me
Reference
Application properties
Move from one DWS to another
Devices properties
Actions reference
Return codes
Appendix
Additional documentation
Troubleshooting
Fujifilm Unified Client
Requirements
Preparing for deployment
High availability support
Equitrac configuration
Configure authentication prompts
Configure Print-to-Me
Cached credentials for Equitrac
Campus card support
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings in AutoStore
Device configuration
NVM setting
Set the IP mode
Turn on authentication setting
Device timeouts
FIPS 140-2 compatibility
Embedded Web Browser
DWS configuration
Dual stack limitations
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Authentication configuration
Configure CAC for authentication
Card reader configuration
Configuring card reader authentication
Configuring card self-registration
Deploying the Unified Client for Fujifilm
Deployment overview
Use DRS to deploy and configure the unified client
Unregister the Unified Client for Fujifilm from the device
Create an AutoStore workflow
Using the Unified Client for Fujifilm
Getting started
Log in to the Unified Client for Fujifilm
Log in as an administrator
Microsoft Entra ID authentication with card registration
Card self-registration
Launcher screen
Screen elements
Device Home button
Release All
Release Key
Billing codes
Enter a billing code
Change the language on the device
Log out
Printing
Use Print-to-Me
Print Job Details screen
Print Settings screen
Print with Business Connect
Reconcile print transactions
Scanning
Scan a document
Scan metadata
Add email address to native emails
Job tracking
Data collected in tracking
Reference
Actions
Application properties
Device properties
Troubleshooting the Unified Client for Fujifilm
Download device logs
Download DWS debug logs
Error messages
HP Unified Client
Features
Authorization
Deployment steps
Requirements
Preparing for deployment
Verify prerequisites
Equitrac configuration
Configure authentication prompts
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings
Authentication configuration
Configure CAC for authentication
Workflow configuration
Custom workflows
Card reader configuration
Configuring card self-registration
DWS configuration
Dual stack limitations
Deploying the Unified Client for HP
Installing ControlSuite
Update DWS certificates
Use DRS to configure and deploy the unified client
Setting up the HP device
Ensure that previous Tungsten Automation applications are cleared
Creating a print workflow
Configure Print-to-Me
Creating a capture workflow
Configure the Send to Folder workflow
Using the Unified Client for HP
Getting started
Log in to the Unified Client for HP
Microsoft Entra ID authentication with card registration
Card self-registration
Launcher screen
Release All
Release Key
Billing codes
Enter billing codes
Log out
Printing
Print-to-Me
Use Print-to-Me
Print Jobs Details
Print Settings
Print with Business Connect
Reconcile print transactions
Scanning
Scan a document
Scan settings
Job tracking
Data collected in tracking
Reference
Unified Client for HP actions reference
Unified Client for HP application properties
Unified Client for HP device properties
Unified Client failover
Troubleshooting
Error messages
Konica Minolta Unified Client
Product features
Campus card support
Delegate printing support
Runtime Replacement Tag (RRT) support
Failover support
System requirements
Supported devices
Prepare for deployment of Unified Client for Konica Minolta
Equitrac configuration
Configuring authentication prompts
Output Manager configuration
Set print preferences
Configure device for access control
AutoStore configuration
Scanning settings in AutoStore
Dynamic form support
Migrate workflows
Workflow configuration
Walk-up copy workflows and billing codes
Authentication configuration
Credential caching
DWS configuration
DWS configuration for TLS
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Certificate acceptance
Dual stack limitations
Device configuration
SSL
Enable and configure SSL
TCP socket setting
Page size release
Web browser
WebDAV client
Auto reset
Printing support
Hide slide menu tab
Update HTTP setting
Card reader configuration
Considerations for setting up a card reader
Configuring card reader authentication
Configuring card self-registration
Deploy Unified Client for Konica Minolta
Overview of the deployment process
DRS setup and device registration
Change configuration
Unregister Unified Client for Konica Minolta from the device
Create a first workflow in AutoStore
Using Unified Client for Konica Minolta
Getting started with the Unified Client for Konica Minolta
Logging on
Microsoft Entra ID authentication with card registration
Card self-registration
Public access
Billing codes
Show recently used billing codes
Launcher screen
Release key
Device Home button
Screen elements
Logging off
Printing features
Print job management
Print-to-Me screen
Print Jobs Details screen
Print Settings screen
Printing with Tungsten Business Connect
Scanning features
Scan documents
Scan form fields
Job tracking
Data collected in tracking
GDPR compliance tasks
Reference
Unified Client for Konica Minolta application properties
Unified Client for Konica Minolta device properties
Unified Client for Konica Minolta actions reference
Debugging tips
DWS debug logs
Device debug logs
Troubleshooting the Unified Client for Konica Minolta
Error messages
Lexmark Unified Client
Features
System requirements
Prepare to deploy the Unified Client for Lexmark
Device configuration
Enable HTTPS
Create a local device administrator
Equitrac configuration
Configure authentication prompts
Configure the Quick Shortcut buttons
DCE pinning
Output Manager configuration
Add a device
Set print preferences
AutoStore configuration
Scanning settings
Workflow configuration
Walk-up copy workflows and billing codes
Authentication configuration
Configure CAC for authentication
Card reader configuration
Configuring card self-registration
Deploy the Unified Client for Lexmark
Use DRS to configure and deploy the unified client
Using the Unified Client for Lexmark
Getting started
Log onto the Unified Client for Lexmark
Card self-registration
Change the language on the device
Launcher screen
Home button
Screen elements
Release All
Release Key
Billing codes
Log out
Printing
Print-to-Me
Print Jobs Details
Print Settings
Print with Business Connect
Scanning
Create an AutoStore workflow
Scan settings
Scan a document
Job tracking
Data collected in tracking
Reference
Unified Client for Lexmark actions reference
Unified Client for Lexmark application properties
Unified Client for Lexmark device properties
Debugging tips
Download debugging logs
Troubleshooting
Error messages
Ricoh Unified Clients
Ricoh SOP for AutoStore
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh SOP
Install ControlSuite for AutoStore
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS authorization
Using the Unified Client for Ricoh SOP
Elements of the Ricoh SOP user interface
Launcher screen
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Scanning settings
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Device configuration for AuthOff
Configuring the CAC authentication solution
Configure SP Mode Settings
Change the TLS settings
DRS Authorization Key
Restart the device
Ricoh SOP for AutoStore and Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh SOP
Install ControlSuite for AutoStore and Equitrac
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS settings after uninstalling the unified client
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Configuring Equitrac to use with Ricoh SOP
Configure Equitrac
Installation and configuration
Equitrac card readers
Card reader setup
Using the Unified Client for Ricoh SOP
Elements of the Ricoh SOP user interface
Launcher screen
Getting started
Logging into Unified Client for Ricoh Smart Operation Panel
Microsoft Entra ID authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Scanning settings
Set up your first print workflow
Use Print-to-Me
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a new Device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the CAC authentication solution
Configure SP mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Ricoh SOP for AutoStore and Output Manager
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh SOP
Install ControlSuite for AutoStore and Output Manager
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS settings after uninstalling the unified client
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Using the Unified Client for Ricoh SOP
Elements of the Ricoh SOP user interface
Launcher screen
Getting started
Typical usage
Output Manager login
Login settings
User name and password entry
Card swipe
Manual ID entry
Microsoft Entra ID authentication with card registration
Screen layout
View print jobs
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Scanning settings
Set up your first print workflow
Add sources
Add destinations
Manually route documents to a destination
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a new device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Disable print from USB
Configuring the CAC authentication solution
Configure SP Mode Settings
Change the TLS settings
Set the paper type
DRS Authorization Key
Restart the device
Ricoh SOP for Output Manager
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh SOP
Install ControlSuite for Output Manager
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS settings after uninstalling the unified client
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Using the Unified Client for Ricoh SOP
Elements of the Ricoh SOP user interface
Launcher screen
Getting started
Typical usage
Output Manager login
Login settings
User name and password entry
Card swipe
Manual ID entry
Microsoft Entra ID authentication with card registration
Screen layout
View print jobs
Logout
Set up your first print workflow
Add sources
Add destinations
Manually route documents to a destination
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a new Device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Disable print from USB
Configuring the CAC authentication solution
Configure SP Mode Settings
Change the TLS settings
Set the paper type
DRS Authorization Key
Restart the device
Ricoh PCC for Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy Ricoh PCC
Install ControlSuite for Equitrac
Set up the Equitrac Embedded for Ricoh PCC SFP or MFP
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS authorization
Configuring Equitrac to use with Ricoh PCC
Configure Equitrac
Installation and configuration
Server-side configuration scenario
Equitrac card readers
Card reader setup
Using Ricoh PCC
Elements of the Ricoh PCC user interface
Launcher screen
Getting started
Logging in
Microsoft Entra ID authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first print workflow
Use Print-to-Me
Reference
Actions reference
Error codes
Return codes
Action status codes
Application properties
Device properties
Device status
Files tab
Application types
Add a new Device profile
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the CAC authentication solution
Configure SP Mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Ricoh PCC for AutoStore and Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy Ricoh PCC
Install ControlSuite for Equitrac and AutoStore
Use DRS to configure and deploy the unified client
Uninstall the client using DRS
DRS authorization
Set up a Ricoh PCC MFP
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Configuring Equitrac to use with Ricoh PCC
Configure Equitrac
Installation and configuration
Server-side configuration scenario
Equitrac card readers
Card reader setup
Using Ricoh PCC
Elements of the Ricoh PCC user interface
Launcher screen
Getting started
Logging in
Microsoft Entra ID authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Scanning settings
Set up your first print workflow
Use Print-to-Me
Reference
Actions reference
Return codes
Action status codes
Application properties
Device properties
Device status
Files tab
Application types
Add a new device profile
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the CAC authentication solution
Configure SP Mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Samsung Smart UX Unified Client
Checklist: Unified Client for Samsung Smart UX implementation
Requirements
Multi-language support
Configuring Unified Client for Samsung Smart UX
AutoStore configuration
AutoStore features
AutoStore server-side configuration
Additional documentation for AutoStore
AutoStore Smart UX component licensing
Equitrac configuration
Equitrac features
Installation and configuration
Before you install
Equitrac server-side configuration
Additional documentation for Equitrac
Equitrac card readers
Card reader setup
USB keyboards
Use DRS to configure and deploy the unified client
Set up with AutoStore
Set up with Equitrac
Set up with AutoStore and Equitrac
Server-side configuration
Licensing Unified Client for Samsung Smart UX
If the license is invalid
If the serial number is denied
Add a printer on a TCP/IP printer port
Configuring Unified Client for Samsung Smart UX embedded devices
Automatically creating embedded devices
Manually configuring embedded devices
Licensing the device
Enabling the Guest user
Guest user setup
Configuring workflows
Tracking jobs originating at the device
Setting timeouts
Enabling secure printing
Secure printing on the physical device
Enable secure printing on the embedded device
Configure Print-to-Me
Configure Capture and Send
Scan-to-Me
Configure the Mail Server
Enforce color quotas
Enable the billing code prompt
Operation through DCE caching
Configure account and session display
Configuring available MFP functions
Samsung Smart UX workflow and workflow container settings for the device
Using Unified Client for Samsung Smart UX
Elements of Unified Client for Samsung Smart UX user interface
Getting started
Logging into Unified Client for Samsung Smart UX
If you have difficulty logging in
Enter billing codes
Using Print-to-Me
Scanning
Terminology
Prepare to scan
Using LDAP Email Search
Reference
Application properties
Device properties
Device status
Files tab
Actions reference
Return codes
Action status codes
Toshiba Unified Client
Features
Deployment steps
Preparing for deployment
Verify prerequisites
Language support
Download installer packages
Device Web Server
Deployment scenarios
Managing the Device Web Server
Install the DWS with AutoStore
Install the DWS after moving to an AutoStore only environment
Move to an AutoStore and Equitrac environment
Equitrac configuration
Set up the Tungsten button on Equitrac
Configure the Launcher
Enabling the Guest user
Set up the Guest user
Configure workflows
Track jobs originating at the device
Configure card self-registration
Secure printing
Configure the print queue
AutoStore configuration
Set up the Tungsten button on AutoStore
Scan settings
Deploying the Unified Client for Toshiba
Installing the Unified Client for Toshiba
Installing ControlSuite
Install the AutoStore server
License AutoStore
Installing Equitrac
Install the Equitrac server
Install the Equitrac hotfixes
Install DWS standalone
Install DRS and upload the client package
Set up the Toshiba MFP
Configure the Toshiba MFP in a Unified Client environment
Install SSL/TLS root certificate
Import or create the Device Certificate on the Toshiba device
Ensure SSL/TLS is enabled for ODCA on the Toshiba device
Clear previous applications
Set up your first capture workflow
Configure Send to Folder
Set up your first print workflow
Configure Print-to-Me
I-Queue printing
Enable release keys
Using the Unified Client for Toshiba
Getting started
Logging into Unified Client for Toshiba
Elements of the user interface
Launcher
Release All
Release key
Enter billing codes
Use Print-to-Me
Scanning
Prepare to scan
Using Native Copy, Fax, and Scan
Logging out
Reference
Device properties
Actions reference
Application properties
Return codes
Device notes
Changing the EXTENSION button label
Finalizing the uninstallation
Reboot the device
Troubleshooting
Xerox Unified Client
System requirements
Prepare for deployment of Unified Client for Xerox
Equitrac configuration
Configuring authentication prompts
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings in AutoStore
Scan settings constraints
Dynamic form support
Migrate workflows
Workflow configuration
Centralized and decentralized workflows
Walk-up copy workflows and billing codes
Authentication configuration
Xerox component RRTs
Credential caching
Timeout configuration
DWS configuration
Failover support
DWS configuration for TLS
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Export the root self-signed certificate from DWS
Device configuration
AltaLink configuration
PrimeLink configuration
VersaLink properties
Dual stack limitations
Card reader configuration
Card reader licensing
Adding card reader support
Adding Smart Card Support
Configuring card reader authentication
Configuring card self-registration
Deploy Unified Client for Xerox
Overview of the deployment process
DRS setup and device registration
Unregister Unified Client for Xerox from the device
Set language of client
Create a first workflow
Using Unified Client for Xerox
Getting started with the Unified Client for Xerox
Logging on
Card self-registration
Microsoft Entra ID authentication with card registration
Billing codes
Launcher screen
Release key
Device Home button
Screen elements
Logging off
Printing features
Print job management
Print-to-Me screen
Print Jobs Details screen
Print Settings screen
Printing with Tungsten Business Connect
Reconcile print transactions
Scanning features
Scan documents
Scan form fields
Scan Settings screen
Job tracking
Data collected in tracking
GDPR compliance tasks
Reference
Unified Client for Xerox application properties
Unified Client for Xerox device properties
Unified Client for Xerox Actions reference
Debugging tips
DWS debug logs
Device debug logs
Troubleshooting the Unified Client for Xerox
Error messages
Combined Clients overview
Konica Minolta Combined Client
Implementation checklist
Requirements
Prepare the MFP to run the Combined Client for Konica Minolta
Configure Konica Minolta OpenAPI
Configure MFP Auto Reset Settings
Configure MFP for print release
Configuring a device to use the authentication application
Configure a device to use SSL for Web Services (OpenAPI)
Configure WebDAV to use SSL
Configure TCP Socket Setting to use SSL/TLS
Enable Web Browser
Check Authentication
Certificate validation
Configuring the Combined Client for Konica Minolta
Configure Equitrac
Server side configuration
Configure secure printing
Configure an embedded device
Configure authentication prompts
Configure printer driver
Configure device print tracking
Configure user authentication
Configure print authentication at the MFP
Configure billing codes for Combined Client for Konica Minolta devices
Configure a default billing code
Enforce color quotas
Receiving print error messages
Equitrac only deployment configuration
Copy Stop
Configure Output Manager
Output Manager authentication
Card reader authentication with Output Manager
Output Manager touchscreen authentication
Configure the client web server
Configure Output Manager devices
Configure device for accounting
Configure device for access control
Configure device for print preferences
Configure login methods
Configure billing accounts
Configure copy quotas
Configure an Output Manager destination
Accounting
Output Manager only deployment
Configure AutoStore
AutoStore authentication
AutoStore only deployment
Using the Combined Client for Konica Minolta
Combined Client for Konica Minolta login
Output Manager login
AutoStore login
Equitrac login
Switch between capture and print
Manage print jobs
Configure print settings
View Print Manager job information
Start an AutoStore workflow
Reference
Application settings
Device settings
Actions reference
Return codes
Restrictions and limitations
Troubleshooting
AutoStore Clients overview
Kyocera MFP (HyPAS)
Overview
Using the Kyocera MFP (HyPAS) component
Kyocera MFP (HyPAS) Component configuration
Groups tab
Groups
Menus
Forms
Basic form
PDF Encryption Settings dialog box
Send to Folder form
Email form
Send to SharePoint form
Form templates
Field types
Checkbox field options
Date/time field options
List field options
Numeric field options
Text field options
Tree field options
Preferences tab
Authentication tab
LDAP Lookup Settings dialog box
Kyocera MFP (HyPAS) component RRTs
Setting the component log level
Device setup and configuration
Install the KYOcapture MFP application
License the KYOcapture application
Configure the KYOcapture application for the first time
Change a configuration
Scan a document from a device
Supported devices
Equitrac Clients overview
Kyocera Embedded Client
About user authentication
About Secure Document Release
Supported MFPs and card readers
Magstripe device reader
Proximity cards
System requirements
Installation and configuration requirements
List of terms
Server and MFP configuration
Install the embedded application
Create and configure embedded devices
Automatically create embedded devices
Manually configure embedded devices
Configure authentication prompts
Configure billing code popup behavior
Enable release key prompt
Configure Follow-You Printing
Copy enforcement and configuration
Color quota enforcement
Configure the MFP through a web interface
Add Kyocera controller
User workflows
Authenticate with a magnetic stripe card
Authenticating with a proximity or smart card
Card reader status messages
Register swipe cards
Billing codes and job release
Use Follow-You Printing with Kyocera devices
Sharp-OSA Embedded Client
Requirements
Supported MFPs and Card Readers
List of Terms
MFP and Server Configuration
Configuring the Application on the Server
Creating and Configuring Embedded Devices
Automatically Create Embedded Devices
Manually Configure Embedded Devices
Configuring a Specific Device
Billing code behavior
Configuring Print Tracking
Print Tracking Through Equitrac Ports
Print Tracking Through the MFP Accounting Log
Configuring Follow-You Printing
Enabling Release Keys
Configuring Authentication Prompts
Preparing to Configure Sharp MFPs
Preparing to Configure the Embedded Application via a Web Interface
Configure the Application on Sharp OSA3.5 and OSA4 MFPs
Enable authentication
Configure the Follow-You Printing Application
Set up a card reader
User Workflows
Using Sharp OSA3.5 and OSA4 MFPs
Using Follow-You Printing on OSA3.5 and OSA4 MFPs
Xerox ECSP Embedded Client
About user authentication
Xerox ECSP features
Installation and configuration requirements
Server and MFP requirements
System requirements
Supported MFPs
Magstripe device reader
Proximity Cards
List of terms
MFP configuration
Configure MFP properties
Configure the AltaLink series
Configure the PrimeLink series
Configure the VersaLink series
Configure the WorkCentre 4265
WorkCentre 57xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
WorkCentre 75xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Set the default landing page
ConnectKey enabled MFPs
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Set the default landing page
ColorQube 92xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Server-side configuration
Configure secure printing
Configure authentication prompts
Set Xerox Convenience Authentication prompts
Enable release keys
Configure billing code popup behavior
Configure embedded devices
Configure workflows
Print tracking configuration
Track print through printer ports
Track print using Xerox Network Accounting
Disable Equitrac print tracking
Track color prints or copies using Xerox tiered billing
Enable escrow for print and copy
Receive print error messages
Reconcile print transactions
Add Workflows to the Xerox All Services screen
Configure SNMP Communication
Add a customized logo
User workflows
Authenticate with a magnetic stripe card
Authenticate with a proximity card
Card reader status messages
Logging in to a user session
Authenticate through the Equitrac Server
Selecting functions
Using Follow-You Printing
Scanning
Terminology
Scan workflow overview
Scan workflows
Use LDAP Email Search
Adjusting the Scan Settings
Delivery formats
Scan image orientation
Device Registration Service
Open the DRS web client
Working with Applications
Add an Application profile
Edit Application profile settings
Working with Devices
Add a new Device profile
Edit a Device
Changing languages on Device
Change language on eBN Device
Change language on eBX Device
Filter Device and group information
Import Device information
Export Device information
Device status
Working with Device Groups
Add a Device group
Add an existing Device to a Device group
Add a new Device profile to a Device group
Move devices to a different group
Working with client packages
Files list (Unified Client installation packages)
Upload a Unified or Combined Client installation package to DRS
Remove a package file from DRS
Rename a package file in DRS
Performing Actions on Devices
Perform Device Actions
View Action history
Download DRS logs
Use multiple DRS instances with one database
Manage the DRS service on the server
Troubleshooting the DRS
Service verification
Device Web Server
View the DWS Web administration page
Purge DWS logs
Generate a CA Certificate using an IP address
Regenerate certificates
DWS failover
DWS failover scenarios
›
ControlSuite Clients
›
Unified Clients overview
›
Tungsten Unified Client for Epson
›
Appendix
Appendix
This section provides information for the Unified Client for Epson and devices.
×
Client HelpClient Help